SRX

Hi there,

I'm trying to upgrade my SRX220H2 to lattes firmware version:

12.3X48-D65

Actually I have:

--- JUNOS 12.1X46-D72.2 built 2017-12-23 09:11:03 UTC

During the progress of the processing I've got that the:

platform srx220h for 12.1X47 and higher is not supported.

I've the same hardware and chassis cluster in the other localization:

There I've upgraded cluster successfully but in two steps:

1. upgrade to 12.1x46-d65.4

1. then upgrade to 12.3x48-d65.1.

Why it's not working for upgrade from 12.1X46-D72.2 ?

log:

/var/tmp/incoming-package.5246                        1103 kB 1103 kBps
Package contains junos-12.3X48-D65.1.tgz ; renaming ...
NOTICE: Validating configuration against junos-12.3X48-D65.1.tgz.
NOTICE: Use the 'no-validate' option to skip this if desired.
Formatting alternate root (/dev/ad0s2a)...
/dev/ad0s2a: 299.7MB (613852 sectors) block size 16384, fragment size 2048
    using 4 cylinder groups of 74.94MB, 4796 blks, 9600 inodes.
super-block backups (for fsck -b #) at:
 32, 153504, 306976, 460448
Extracting /var/tmp/junos-12.3X48-D65.1.tgz ...
Checking compatibility with configuration
Initializing...
Verified manifest signed by PackageProductionEc_2017 method ECDSA
veriexec: cannot bless /packages/junos-12.1X46-D72.2-domestic: Authentication error
Verified junos-12.1X46-D72.2-domestic signed by PackageProductionEc_2017 method ECDSA
Using junos-12.3X48-D65.1-domestic from /altroot/cf/packages/install-tmp/junos-12.3X48-D65.1-domestic
Copying package ...
ERROR: Unsupported platform srx220h for 12.1X47 and higher
ERROR: validate-config: junos/+REQUIRE fails
WARNING: Current configuration not compatible with /altroot/cf/packages/install-tmp/junos-12.3X48-D65.1-domestic

version:

>>>> show version      
node0:
--------------------------------------------------------------------------
Hostname: gwoffice
Model: srx220h
JUNOS Software Release [12.1X46-D72.2]

node1:
--------------------------------------------------------------------------
Hostname: gwoffice
Model: srx220h
JUNOS Software Release [12.1X46-D72.2]

>>>>>> show chassis hardware
node0:
--------------------------------------------------------------------------
Hardware inventory:
Item             Version  Part number  Serial number     Description
Chassis                                AQxxAAxxxx      SRX220H
Routing Engine   REV 21   750-031175   AAFTxxxx          RE-SRX220H
FPC 0                                                    FPC
  PIC 0                                                  8x GE Base PIC
Power Supply 0  

node1:
--------------------------------------------------------------------------
Hardware inventory:
Item             Version  Part number  Serial number     Description
Chassis                                AQxxxxAAxxxx      SRX220H
Routing Engine   REV 21   750-031175   AADNxxxx          RE-SRX220H
FPC 0                                                    FPC
  PIC 0                                                  8x GE Base PIC
Power Supply 0  

I'll be appreciate for help.

It may not upgrade from all, this is known bug tracked by via PR#987067

https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR987067

I would perhaps try with a no-validate knob (request system software add /var/tmp/image.tgz no-validate). though you should follow this tsb: https://kb.juniper.net/InfoCenter/index?page=content&id=tsb16646&actp=METADATA&act=login

Juniper had similar issue before.

As a work around you can install 12.3X48-D10 first.

Regards

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too

Hi,
Forget about it. This is cluster of the srx220H instead of srx220H2.
I've noticed it during comparison output :

show chassis routing-engine

Routing Engine status:
    Temperature                 49 degrees C / 120 degrees F
    Total memory              1024 MB Max   666 MB used ( 65 percent)
      Control plane memory     544 MB Max   419 MB used ( 77 percent)
      Data plane memory        480 MB Max   250 MB used ( 52 percent)
    CPU utilization:
      User                       7 percent
      Background                 0 percent
      Kernel                    15 percent
      Interrupt                  0 percent
      Idle                      78 percent
    Model                          RE-SRX220H
    Serial ID                      AAFTxxxx
    Start time                     2018-03-22 01:24:29 CET
    Uptime                         44 minutes, 13 seconds
    Last reboot reason             0x200:normal shutdown
    Load averages:                 1 minute   5 minute  15 minute
                                       0.20       0.42       0.69

Total memory 1024 mb and symbol is 220h instead of 220h2 like on the second localization:

Routing Engine status:
    Temperature                 52 degrees C / 125 degrees F
    Total memory              2048 MB Max   860 MB used ( 42 percent)
      Control plane memory    1072 MB Max   461 MB used ( 43 percent)
      Data plane memory        976 MB Max   400 MB used ( 41 percent)
    CPU utilization:
      User                      19 percent
      Background                 0 percent
      Kernel                    23 percent
      Interrupt                  2 percent
      Idle                      55 percent
    Model                          RE-SRX220H2
    Serial ID                      ACKDxxxx
    Start time                     2018-03-21 01:22:40 CET
    Uptime                         1 day, 47 minutes, 39 seconds
    Last reboot reason             0x200:normal shutdown
    Load averages:                 1 minute   5 minute  15 minute
                                       0.72       0.67       0.65