Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



EX3400 limit DSCP traffic

This thread has been viewed 2 times
  • 1.  EX3400 limit DSCP traffic

    Posted 06-11-2022 06:01
    Hi Experts,

    I see that the firewall filter has a DSCP option when setting throttling.
    So I tried to use, but found that it couldn't be triggered.
    Is this option not applicable to throttling?

    set interfaces xe-0/0/0 unit 0 family ethernet-switching interface-mode trunk
    set interfaces xe-0/0/0 unit 0 family ethernet-switching vlan members test
    set interfaces xe-0/0/1 unit 0 family ethernet-switching vlan members test
    set interfaces xe-0/0/1 unit 0 family ethernet-switching filter input limitPak
    set interfaces xe-0/0/1 unit 0 family ethernet-switching filter output limitPak
    
    set firewall family ethernet-switching filter limitPak term 0 from dscp cs0
    set firewall family ethernet-switching filter limitPak term 0 then three-color-policer single-rate qoslimit
    set firewall family ethernet-switching filter limitPak term 1 then accept
    
    set firewall three-color-policer qoslimit single-rate committed-information-rate 32k
    set firewall three-color-policer qoslimit single-rate committed-burst-size 1500
    set firewall three-color-policer qoslimit single-rate excess-burst-size 1500
    
    set vlans test vlan-id 10



    ------------------------------
    GARY WU
    ------------------------------