Get answers on all things routing, including routing portfolios and protocols. Post here or in the following product groups: 


To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Hi there, I'm connecting a vMX to a route-reflector using IPv6 addresses. BGP session is UP. Router is advertising correct prefixes, but the next-hop is a " fe80::250:5600:48f:93df" address not the loopback/local-address used in configuration. See ...

  • what's FIB size of acx 7100 and acx 6000?

  • Hello, Indeed. i tested with a local interface, if the next-hop is not in the same network/subnet and/or unreachable then the route is not added. ------------------------------ Oliver Duruiss ------------------------------

  • Thanks for your answer, This is because you set a /31 subnet so junos is able to reach the next-hop With a /32 this is not working as the next-hop is not reachable ------------------------------ Oliver Duruiss ------------------- ...

  • [edit] root@R1# set interfaces ge-0/0/0 unit 0 family inet address root@R1> show route inet.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both *[Static/5] 00:00:02 > to ...


  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.

  • How are we doing?

    Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!

    Please record your video here 

    Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button. 

    Thank you in advance!

Current Members