Junos OS


Get answers on Junos 💚 and share your expertise.

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • The general data sheet does show that the mx104 supports nat configuration. But it is not clear what license may be required for this. https://www.juniper.net/us/en/products/routers/mx-series/mx-series-universal-routing-platforms-datasheet.html you ...

  • Can someone explain why the SRX300 (20.2R3-S2.5) and the SRX220 (12.3X48-D105.4) use different versions of IGMP (IGMPv3 and IGMPv2 respectively) on the pim-to-igmp-proxy upstream interface. And is there a way to force the srx300 to use IGMPv2 instead. ...

  • This message was posted by a user wishing to remain anonymous I have the following scenario and I need to transport vlans 10 (trunk) and 20 (access) from Switch 1 to Switch 2. But I only can use 9090 vlan for link switch 1 and switch 2. I thought if ...

  • Hi Ali, this depends a bit on your approach after receiving input previously posts regarding the old licensing vs. flex licensing. Flex premium licenses/subscriptions includes 1:1 inline J-flow (ref. figure 1 on https://www.juniper.net/documentation/us/en/software/license/licensing/topics/concept/flex-licenses-for-mx-and-service-cards.html) ...

  • Dear All, In my office I have MX 104 router and subnet private LAN subnet ( and a Public a IP and I want to do basic NAT for Internet access on my private LAN. Can Someone help me with configuration also I don't have Service Card for NAT ...


  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.

  • Help us help you!

    Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!

    Please record your video here 

    Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button. 

    Thank you in advance!