Get answers on switching topics, including the EX and QFX portfolios, and share your expertise.

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Hi, As per the below documentation this feature for preference based DF election is only supported on the MX platforms. https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/preference-df-election-df-election-type.html ...

  • Hi We have Juniper QFX5100s running randomly dropping MPLS ccc L2 circuits. They are running 17.3R3-S1.5. Configuration is basically: set protocols l2circuit neighbor interface xe-0/0/8.0 virtual-circuit-id 418 set protocols l2circuit ...

  • I have a scenario where I have 2, but could end up being 3 leaves(leaf switches) that will belong to the same ESI. I want to be able to control which of one of these 2(or3) leaves will be the elected DF(designated forwarder). I know on the MXs, there ...

  • thanks a lot !!

  • Profile Picture

    RE: Default route?

    Hi, The route with * will be the path taken since it has the lowest AD. All the vlans can use the default route if there is no specific route. Access-internal routes are created when the device is used for DHCP. HTH


  • Welcome! How to Navigate the New Site

    Welcome to our new Juniper community! Please pardon our dust as we put the finishing touches on our new site over the next few days. A few tips: 

    1. To explore communities, select Communities in the navigation. Keep returning there to navigate. 
    2. When you log in, be sure to complete your profile and join communities to subscribe.
    3. Check out the FAQ to answer any questions. 

    We are glad you are here! 

    If you have any questions, please contact us.
Current Members
164 Members
Hidden Member
community Admin
community Admin
community Moderator