Switching

Welcome! 

Get answers on switching topics, including the EX and QFX portfolios, and share your expertise.

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • In cisco world this would work like charm: ip forward-protocol udp 48689 In Juniper this is required: set forwarding-options helpers port 48689 interface irb.24 server 192.168.24.0 ???????? I need that for whole VLAN 24. I dont understand server ...

  • In VMware the redundant ports to the server are straight layer 2 normal access or trunk ports. And the Hypervisor takes care of loop prevention and redundancy for the links. You will need to verify with HyperV and PowerVM how they manage the switch ...

  • Dear All, One of my customers is asking to configure VRRP with three of their servers. One server is Hyper-V and other two are Power VM. The topology would be as below mentioned. Could you please help how can we make connectivity using lacp? and what ...

  • Hi, For EX4200 series you can apply the filter as vlan filter in ingress direction to achive what you want to do. set vlans VLANXXX filter input FILTER-XXX ------------------------------ MEHMET SUEL ------------------------------

  • As Keith noted, your filter for this flow would be on the input side. Device source address > input on port The egress side is for traffic destined to the device, so on that side the device ip will be in the destination address not the source address. ...

Upcoming Events


Announcements

  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.

  • How are we doing?

    Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!

    Please record your video here 

    Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button. 

    Thank you in advance!