View Only


Get answers on switching topics, including the EX and QFX portfolios, and share your expertise.

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Profile Picture

    RE: Vlan issue on EX 3300

    What is the full configuration for interface ge-1/0/40 show configuration | display set | match ge-1/0/40 Do any vlans have all interfaces assigned show configuration vlans | display set | match all ------------------------------ Steve Puluka BSEET ...

  • Virtual chassis is only for the EX switch models. And the participation in a virtual chassis group is limited to specific models per group. For this group you would need ex4550, ex4500 or ex4200 as members. https://www.juniper.net/documentation/en_US/release-independent/junos/topics/topic-map/ex4550-virtual-chassis.html ...

  • I have an EX4550 which I can't get out of being {linecard:0}​ in a virtual chassis that no longer exists, (thread here ) I have an SRX-300 sitting around as a spare, is it possible to create a 'fake master' with the SRX device that will see my ...

  • Profile Picture

    Vlan issue on EX 3300

    I have an interface on EX3300 configured as an access port on vlan B however the device connected to that interface is still getting ip address via DHCP server on VLAN A. Switch configured for VLAN B set interfaces ge-1/0/40 unit 0 family ethernet-switching ...

  • Profile Picture

    RE: EX2300 switches

    Hi, As long it not announce public EOL then consider it still not EOL. Thanks



  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.