View Only


Get answers on all things routing, including routing portfolios and protocols. Post here or in the following product groups: 


To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Yeah that I know I was only wondering if there is an option to force the Juniper router to advertise route not existed in the table. For now I'm advertising using the lo0 interface witch creates direct routes Anyway, Thanks Steve :) ------------------------------ ...

  • A route must be in the table to be advertised. Typically you would create either a local static route or aggregate route for the prefix not normally in the table and then create the appropriate policy for that. ------------------------------ Steve ...

  • Hi Is is possible in Juniper to advertise routes not existed in the routing table ? Like in FortiGate it is possible with: set network-import-check disable​ But I couldn't find in Juniper command other than: set protocols bgp group XYZ advertise-inactive​ ...

  • I have a question about LSP. So, we are configured the Dynamic LSP, but, if we have a link fail in the middle path, this LSP down and fastly stay up. We use a FRR in all devices, but even though this LSP have a FLAP. This one secod that stay down, my ...

  • Hello Ankan, Good day ! Check if you have enabled ssh services ? Thanks Ruban ------------------------------ RUBAN PRASAT JOHNSON ------------------------------


  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.

  • How are we doing?

    Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!

    Please record your video here 

    Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button. 

    Thank you in advance!