Security


Welcome!

Get answers on securing your network and share your expertise.  Post here or in the following product groups: 

Intrusion Prevention
Screen OS
SRX 
vSRX 

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Ok, seeing as this is 3+ hours of my life that I will never get back, I thought I would take another hour to record this simple solution to fix an annoying problem. I have two SRX340s on 18.4R3-S2 code. The problem isn't necessarily related to this code ...

  • Profile Picture

    RE: One-sided IKE SA

    Do you have nat traversal on in the configuration? This is required when the gateway interface address is behind a nat. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet ...

  • Profile Picture

    One-sided IKE SA

    I have two SRX firewalls. One is a 320, the other is 345. I am trying to configure AutoVPN between them. I have found that the IKE SA is up on the hub side. The hub has a static Public IP, which is applied with NAT by an upstream device. The hub is always ...

  • The problem was that somewhere along the upgrade path I needed to add "set security log mode event". I'm not sure which release introduced the requirement for that, but that was the fix.

  • Hi, I've ugpraded from JunOS 15 to JunOS 19 and one of the side effects appears to be that there are no longer any syslog messages being written for SRX security events. In fact the only log files that are now being written to are "debug_wmid.2", "messages", ...

Latest Shared Files

Community Blogs

  • We live in a world where everything is being automated – from the “smart” gadgets in your home to, eventually, the self-driving car that takes you to work. Now and in the future, it will be difficult to find something that is not suited to automation. ...

    2 people recommend this.

Announcements

  • Welcome! How to Navigate the New Site

    Welcome to our new Juniper community! Please pardon our dust as we put the finishing touches on our new site over the next few days. A few tips: 

    1. To explore communities, select Communities in the navigation. Keep returning there to navigate. 
    2. When you log in, be sure to complete your profile and join communities to subscribe.
    3. Check out the FAQ to answer any questions. 

    We are glad you are here! 

    If you have any questions, please contact us.
Current Members
108 Members
Hidden Member
community Admin
community Admin
community Admin
community Moderator
community Moderator
community Moderator