thanks so much for your pinpoint. I got it.
As I suspected, these routes are not coming from 192.168.0.1 or 192.168.0.2, but from a different router: 192.168.37.7 From the configuration you shared, the rib-group in under group DC where only neighbors 192.168.0.1 or 192.168.0.2 are configured. ...
Here is my topology I need to advertise 10.200/16 to Customer router. After applied rib-group as follows, vMX4 is what I expect to see, I am lost why not vMX3 too. root@ vMX3 # show protocols bgp | display set set protocols bgp group DC type ...
Can you post the output of show route 10.200.100.0/24 extensive? Regards, ------------------------------ Yasmin Lara Juniper Ambassador JNCIE-SP, JNCIE-ENT, JNCIE-DC, JNCIE-SEC JNCDS-DC, JNCIA-DevOps, JNCIP-CLOUD, CCNP-ENT --------------------- ...
Per our email exchange, we have seen similar behavior on Triumph3 systems (EX4300) where configuring an IRB interface would cause multicast traffic to punt to the CPU. QFX 1RU use Trident, but it could be something similar. There was a PR opened for this, ...
Network in Question