Get answers on switching topics, including the EX and QFX portfolios, and share your expertise.

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Profile Picture

    RE: EX3300 Strange Behavior

    Hi Benni, Seems like system corruption on primary partition lead to switch falling into db promt. Since it halted without any problems second time, it must have booted from secondary partition. Since it's working fine now, you can take a snapshot to ...

  • Hi avishm, thank you for the reply. The steps I took were pretty straightforward: - copy the jweb package (jweb-15.1R4.6-signed.tgz) from the corresponding support page on the Juniper website to the USB stick - mounting the USB stick to /var/tmp/usb ...

  • Thank you Steve. I zeroized the switch and it accepted my commands properly! ------------------------------ JOHN HIGH ------------------------------

  • Hi Benni, 1) Let us know the procedure you followed for j-web installation. You might have missed any step. Example: may not have enabled the j-web knob: set system services web-management http 2) EX3300 and EX3400 are different platforms. Hence ...

  • Sounds like something is corrupted either hardware or software. Try the process again after a shutdown and clean startup. Not a reboot but a full power off. If it still occurs, I would save a copy of of the configuration and then zeroize the device ...

    1 person recommends this.


  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.

  • How are we doing?

    Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!

    Please record your video here 

    Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button. 

    Thank you in advance!