I'd guess that the link did not flap. I've generally had to see the link flap during mtu change events. If it happens again try disable and enable the port. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE ...
good point, Steve - I'll give it a try on my EX. What is your call , though, on the rollback not restablishing the communication ? Thanks, Michel ------------------------------ Michel Lapointe ------------------------------
The reason I asked about the other side is mtu does need to match on the connected ports. So I suspect the issue you are seeing is related to the mismatch in mtu on the link. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP ...
Bonjour Spuluka, Thanks for inquiring. No – no change at all on the other side. I tried it 2 times, and the same thing happened. Last year, my colleague did the same thing hoping ...
Did the mtu change on the other side of the link at the same time? I've not had a lot of ex but changing mtu on mx and acx has been consistently immediate and with only a link bounce when done on both sides of the link roughly the same time. ------------------------------ ...