Hi everyone. This is a very academic question. The OSPF ExStart state is meant to decide which of the two routers in an OSPF adjacency with be the 'master' in the exchange of databases. The OSPF router with the higher Router ID will be elected as the ...
I have the following topology Area 3 is linked to area 0 via GRE tunnels. From R2, I have the following: lab@mxB# run traceroute 182.10.128.1 logical-system R2 traceroute to 182.10.128.1 (182.10.128.1), 30 hops max, 52 byte packets 1 ...
Hi. Here is the default Martian table: [edit] jcluser@vMX-addr-0# run show route martians table inet.0 inet.0: 0.0.0.0/0 exact -- allowed 0.0.0.0/8 orlonger -- disallowed 127.0.0.0/8 orlonger -- allowed 192.0.0.0/24 orlonger -- disallowed 240.0.0.0/4 ...
sorry to bother. I am not patient enough to wait until the ISIS routes showing up in inet.0 root@vMX1# run show route protocol isis inet.0: 20 destinations, 22 routes (18 active, 0 holddown, 3 hidden) + = Active Route, - = Last Active, * = Both 10.150.0.99/32 ...
I have the following topology: There is a GRE tunne between Branch and VRF on vMX1. I like to import ISIS routes from vrf into inet.0 on vMX1. I have the following : root@vMX1# run show route 10.150.99.0/24 inet.0: 20 destinations, 20 routes (17 ...
Network in Question