vMX

Latest Discussion Posts

  • I configured vMX as a DHCP server. It works fine with the local DHCP clients, but not work for the remote clients via relay agent. I have the following configuration. set access address-assignment pool vlan56 family inet network 10.100.56.0/24 set ...

  • thanks so much !!

  • The group has to include the entire path: set groups isis-int logical-system <*> protocols isis interfaces <*> unit <*> family iso Regards, ------------------------------ Yasmin Lara Juniper Ambassador JNCIE-SP, JNCIE-ENT, JNCIE-DC, JNCIE-SEC ...

  • I configured 4 logical systems on an vMX. I tried to use groups, but not available under logical system stanza. I created on the top, then applied to the interfaces in logical system. It does not work. root@DC# show groups | display set set groups isis-int ...

  • Try set interfaces ae0 aggregated-ether-options lacp force-up on both sides. LACP messages might not be supported across the bridge connecting the two vMX instances in your setup. Regards, ------------------------------ Yasmin Lara Juniper Ambassador ...

Latest Shared Files

Log in to see this information

Either the content you're seeking doesn't exist or it requires proper authentication before viewing.

Current Members
11 Members
Hidden Member
community Admin
community Admin
Ulf