Switching

Welcome! 

Get answers on switching topics, including the EX and QFX portfolios, and share your expertise.

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Profile Picture

    RE: EX3300 Strange Behavior

    Hi avishm, thank you for the reply. The steps I took were pretty straightforward: - copy the jweb package (jweb-15.1R4.6-signed.tgz) from the corresponding support page on the Juniper website to the USB stick - mounting the USB stick to /var/tmp/usb ...

  • Thank you Steve. I zeroized the switch and it accepted my commands properly! ------------------------------ JOHN HIGH ------------------------------

  • Hi Benni, 1) Let us know the procedure you followed for j-web installation. You might have missed any step. Example: may not have enabled the j-web knob: set system services web-management http 2) EX3300 and EX3400 are different platforms. Hence ...

  • Sounds like something is corrupted either hardware or software. Try the process again after a shutdown and clean startup. Not a reboot but a full power off. If it still occurs, I would save a copy of of the configuration and then zeroize the device ...

    1 person recommends this.
  • Looks like the configuration was added to force particular configure modes must be used thus preventing normal multi user configuration mode. The options are configure private configure exclusive ------------------------------ Steve Puluka BSEET ...

Announcements

  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.

  • How are we doing?

    Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!

    Please record your video here 

    Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button. 

    Thank you in advance!

Current Members