Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

1 to 50 of 1994 threads (10.2K total posts)
  Thread Subject Replies Last Post Status
EX2300 Uplink ports
1 5 hours ago by michel.tepper
Original post by Anonymous
Intrazone Security Policy and VLANs
1 6 hours ago by spuluka
Original post by Anonymous
QFX5100 per-unit filter policy applies first filter to all units irrespective of configuration
0 yesterday by lbw
QoS setting
1 2 days ago by spuluka
Original post by JoKr
DNS resolution issues EX3400
4 2 days ago by MOHAMMAD ALI
Can we channelize the 40G ports   into 4x10 on EX4300?
3 4 days ago by eric.song
EX4300-MP mixed mode stack with dual RE fails to upgrade from 19.4R1 to 20.4R
0 4 days ago by tgreaser
Can we channelize the 40G ports   into 4x10 on EX4300?
2 4 days ago by eric.song
Find connected Mac Address
1 7 days ago by MFB
Original post by Brian Clanton
Get List of Physical devices (Mac Address)
0 7 days ago by Brian Clanton
Can't perform Ping between Juniper SRX and Cisco Nexus
3 16 days ago by spuluka
Original post by Will I Am
JWEB service not working in 20.4
7 18 days ago by HARINARAYAN TRIPATHI
Creating a MOTD Banner
2 20 days ago by ankurv
Original post by Thiago Morais
VQFX ERPS Setup problem
0 21 days ago by JASON LIN
Enable out of band management access on SRX345 and EX3400 using a switch
0 25 days ago by ABDUL WAHAB QURASHI
Drops on Virtual Chassis Fabric vcp ports
2 one month ago by smicker
Original post by karlink_genius
Configuration File Help - EX3300 will not load config - identical address found on multiple private or public interfaces error: configuration check-out failed
0 one month ago by OWEN O'HARE
irb interface on EX9208 cannot change?
8 one month ago by kronicklez
Ex4200 uplink module with 2x1g port not show
2 one month ago by KEITH GAO
Allow only Linux machines to access network
0 one month ago by NITHIN J
DHCP Server Port-Based Address Allocation Feature Design
0 one month ago by alagarn
EX4600 virtual chassis NSSU
2 one month ago by igor.hamzic81
show command to display vlan-name & active ports
8 one month ago by ivor.levene
Original post by anawaz
Does Juniper EX2300 switch  supports 802.1X supplicant feature?
1 one month ago by spuluka
Original post by Michal Gurbski
EX3300 Strange Behavior
3 one month ago by avishm
Original post by F&K
Can't set plain-text-password on EX
4 one month ago by JOHN HIGH
Unable to enter Edit/Configure Mode on EX 3300
1 one month ago by spuluka
Original post by ankurv
802.1x EX3300
0 one month ago by JoKr
Configuration Best Practices
0 one month ago by RUTVIJ BRAHMBHATT
Resilient hashing on ECMP
0 one month ago by JIAN GU
phone-home
6 one month ago by AARON RODRIGUEZ
Original post by Arix
EVPN VGAs Virtual MAC address to originate packets
3 one month ago by chenjiang
Difference between EX-SFP-1GE-SX and CTP-SFP-1GE-SX
2 one month ago by fb35523
Original post by PETER ABENE
DOes EX 9200 Support NAT configuration
1 2 months ago by spuluka
Original post by VIKAS BHARTI
EX-4600 unconnected uplink interface showing error.
3 2 months ago by avishm
Original post by NAVEEN M
SRX VRRP issue
1 2 months ago by merlin
Original post by Thiago Morais
QFX5100 QinQ configuration
0 2 months ago by chenjiang
An error message "MRVL-L2:mrvl_fdb_mac_entry_uc_set()"
0 2 months ago by gedebook2009
Auto Image Upgrade
5 2 months ago by OCTAVIO CASTILLO
Original post by Erdem
QFX5100-48S-6Q
3 2 months ago by esmontes
Original post by Anonymous
EX3400 captive-Portal not Working
0 2 months ago by CURTIS BRADLEY
Captive Portal on EX2200-C and/or EX4200
2 2 months ago by CURTIS BRADLEY
Original post by Erdem
Trying to route between two EX4550 switches
1 2 months ago by JON YIESLA
Drops are on the BE queue
1 2 months ago by WalkerSteve
Original post by alagarn
phy layer link status mismatch appeared on log message.
3 2 months ago by avishm
Original post by gedebook2009
Client Isolation | Firewall Filter
1 2 months ago by tgreaser
Original post by RoutingFrames
MC-LAG on QFX
2 2 months ago by MFB
EX2200 sent SNMP_TRAP_LINK_DOWN
5 2 months ago by merlin
Original post by Abed AL-R
Unaligned memory pfem
0 2 months ago by merlin
Configure aggregated interface. Do you using ether-option or gigether-option?
0 2 months ago by gedebook2009