Automation

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

1 to 50 of 278 threads (1.2K total posts)
  Thread Subject Replies Last Post Status
Script failing to pull interface details via RPC for IRB interfaces on Juniper QFX
0 6 days ago by RoninDN
scripting request system storage cleanup
2 17 days ago by MARK JOHNS
Automation to pull interface and Interface description to CSV
0 21 days ago by BRADLEY RADOMSKI
RPC-Reply Yang
0 21 days ago by Mariusz Daroch
apstra api inspector
0 23 days ago by Maurizio Del Vecchio
Question on SALT files
1 one month ago by STUART RIDSDALE
Original post by djadhav
Senior Network Engineer opportunity at Ohio State!
0 one month ago by RYAN HOLLAND
Compile commands in a single script to extract monitoring (status) output
1 one month ago by spuluka
Original post by LEANGF.LEANGF
ssh connection permission denied
3 one month ago by Ramon Martinez Garcia
Original post by NICO BOCCIA
Question on Paragon Active Assurance
1 one month ago by PETER TAVENIER
Original post by djadhav
Ansible error when attempting to Connect to Junos Device using juniper.device.pyez
1 one month ago by MICHAEL GARIPPO
Original post by Jeremie Rouzet
SNMP oid for subscriber session ID
0 one month ago by ZURA SHAISHMELASHVILI
Commit synchronize option in Ansible
0 2 months ago by Anonymous
commit sync using ansible
0 2 months ago by Anonymous
simple rescue slax script
9 2 months ago by MILAN MARKOVIC
Original post by MARK JOHNS
Pyez and Ansible error with Junos: 20.4R3.8
4 2 months ago by tayzar
creating a definition for reports
0 2 months ago by MARK JOHNS
How can we improve the Juniper Elevate Community?
1 3 months ago by Jodi Meier
Question on the JET API
3 3 months ago by ANDREY LEO
Original post by djadhav
PyEz ConnectAuthError
1 4 months ago by djadhav
Original post by josephtillman11
EVO Pyez
0 4 months ago by Harshita Kapadia
How to Automatically Update Prefix Lists - Script fails
2 4 months ago by Dragan Jovicic
RPKI session monitor with event-options
2 4 months ago by FRANK FILIPPIDIS
netconf rpc request in secondary node ?
2 5 months ago by JOSE IBANEZ VELA
dev.facts long delay about 10 minutes
0 5 months ago by JOSE IBANEZ VELA
Ansible for Configuration
3 6 months ago by cdjny
Question on JSNAPy --check
0 6 months ago by djadhav
Question on cAdvisor graph
0 7 months ago by djadhav
Question on remotely running SLAX op script.
1 7 months ago by Daniel Jones
Original post by djadhav
scp.SCPException: error: command is not valid on the ex3400-48p
0 7 months ago by LYDIA
Question on XSD file location
1 8 months ago by cdot65
Original post by djadhav
JET API Documentation
1 8 months ago by cdot65
Original post by djadhav
PyEZ and VSCode - Could not resolved Pylance (ReportMissingImports)
2 8 months ago by cdot65
Original post by ArslanNawaz2020
Netconf RPC reply format
2 9 months ago by cdot65
Original post by ISA GOK
Question on Loading a Jinja Template 1 9 months ago by asharp
Original post by djadhav
Ansible playbook for config generation
1 9 months ago by asharp
Original post by DAN RAWLINGS
PYEZ subsystem not found
3 9 months ago by cdot65
Original post by Anonymous
Junos Config Syntax Highlighting for Sublime Text
4 9 months ago by ARENTAS BUTKUS
Original post by Erdem
Automatic TASK
1 9 months ago by kronicklez
Original post by Alberto Guerrero
JTAF / Terraform
0 9 months ago by CHRIS RUSSELL
Execute Slax Scripts in Junos Space? Space Version 21.2R1
2 10 months ago by greg1991
ZTP with SRX Device v15.1X49-D75.5 and ISC v4.4.1
1 10 months ago by Jeremie Rouzet
ZTP for Juniper SRX Devices for initial setup
1 10 months ago by Jeremie Rouzet
Original post by Webernessi
Ad-hoc command suboptions via cli
3 11 months ago by RyRy_G
Paragon Install - Kubernetes HTTP(S) Proxy
1 one year ago by MARTIN ZIEGLER
Configure SRX-12.3X48-D70.3 using NETCONF
0 one year ago by DIKOUE
Junos PyEZ (set command & edit mode)
0 one year ago by Benjamin.cl
off-box pythong load configuration from https server
1 one year ago by gongyayu
off-box python load configuration error
1 one year ago by gongyayu
How to search an existing event for an event policy?
2 one year ago by gongyayu