Switching

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Use of 40Gbe ports on EX3400 as network ports

    Posted 10-19-2021 12:28
    Hi Team,

    We would like to use the two 40Gbe ports on the EX3400 switch which are configured as VCPs by default. Is it possible to switch it to network ports and use it accordingly ?

    Thank you!

    Regards,
    Ammar

    ------------------------------
    AMMAR KEFI
    ------------------------------


  • 2.  RE: Use of 40Gbe ports on EX3400 as network ports

     
    Posted 10-19-2021 18:46
    Hi,

    Yes, please use below command:

    request virtual-chassis vc-port delete pic-slot <pic slot#> port <port#>



  • 3.  RE: Use of 40Gbe ports on EX3400 as network ports

    Posted 10-19-2021 19:16
    Thank you for the reply.

    I've already used the provided command and it works now properly.

    ------------------------------
    AMMAR KEFI
    ------------------------------



  • 4.  RE: Use of 40Gbe ports on EX3400 as network ports

    Posted 10-21-2021 14:25
    Thanks avishm for the information ..