This is true for all Junos devices. It is related to the way the operating system is setup on the original free BSD kernel.
There is a slight improvement on devices running KVM and the Junos VM version.
And the newer Junos EVO is container based and much faster.
------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home------------------------------
Original Message:
Sent: 08-01-2021 01:33
From: FATIH USTA
Subject: Junos boot time is very slow
Thank you for your answer.
I just want to ask one more question for this.
Is this for all junos based devices or just for EX2300?
If is all devices like this that I think is one of the worst boot up time between network device's.
------------------------------
FATIH USTA
Original Message:
Sent: 07-28-2021 16:21
From: STEVE PULUKA
Subject: Junos boot time is very slow
Yes the long boot times are normal.
------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Original Message:
Sent: 07-28-2021 12:06
From: FATIH USTA
Subject: Junos boot time is very slow
Hello everyone,
I'm newbie here. I have a problem/question.
We have a ex2300-48 switch.
The system boots in more than 5 minutes. Is there a solution to this problem or is this normal?
Firmware version: 18.2R3-S8.5
Thank you for your help.
------------------------------
FATIH USTA
------------------------------