vSRX

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

MPLS not supported on vSRX with flow-based mode, right ?

Jump to Best Answer
  • 1.  MPLS not supported on vSRX with flow-based mode, right ?

    Posted 09-02-2021 05:25
    I have a topology with a vSRX as P router.  MPLS is not supported on it with flow-based mode, right ?

    thanks !!


  • 2.  RE: MPLS not supported on vSRX with flow-based mode, right ?

     
    Posted 09-02-2021 05:51
    The vSRX does have some support for mpls.  You can use the Feature Explorer tool to see what features are enabled and what version of Junos started them in.

    this can be done by platform like vSRX

    https://apps.juniper.net/feature-explorer/select-software.html?swName=vSRX&typ=2

    Or you can choose to look at a Junos version and see which feature is in that version with a list of platforms then that have that feature enabled.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: MPLS not supported on vSRX with flow-based mode, right ?

    Posted 09-02-2021 11:12
    thanks a lot !!


  • 4.  RE: MPLS not supported on vSRX with flow-based mode, right ?

    Posted 09-02-2021 08:35

    You can change the forwarding mode of the vSRX to process MPLS frames, with thesett security forwarding-options family mpls mode packet-basedcommand.

    Refer to https://kb.juniper.net/InfoCenter/index?page=content&id=KB30461.

    Elvin


  • 5.  RE: MPLS not supported on vSRX with flow-based mode, right ?

    Posted 09-02-2021 11:12
    If I do this, I will turn off all the security functionality, such as firewall policies, right ?

    thanks so much !!


  • 6.  RE: MPLS not supported on vSRX with flow-based mode, right ?
    Best Answer

    Posted 09-02-2021 13:45
    It will switch it to stateless packet processing, so be cautious.

    Elvin


  • 7.  RE: MPLS not supported on vSRX with flow-based mode, right ?

    Posted 09-02-2021 15:52
    thanks !!