Routing

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  Lag interface question on MX104

    Posted 10-01-2020 09:36

    I am reaching out to support for an answer but thought one of you or your compadres might know.  Does the MX104 allow me to LAG 10G interfaces between the on-board and the 10G card in the slot?  Given the configuration below could I take xe-0/0/0 and swap it’s configuration with xe-2/0/3 to split the LAG between a built-in 10G port and a 10G port on the card?

     

    I have two dual-port 10G cards in the system.  I also have the built-in ports.  The LAG is split between the two cards but I am wondering if I can split between the built-in and one of the cards.

     

    interfaces {

        xe-0/0/0 {

            description "Member BGP group RTC-VTX Raymondville";

            unit 0 {

                family inet {

                    filter {

                        input-list Protect_RE;

                    }

                    address x.x.x.x/30;

                }

            }

        }

        xe-0/1/0 {

            description "LAG AE1 to CORE-SW AE0";

            gigether-options {

                802.3ad ae1;

            }

        }

        xe-0/2/0 {

            description "Member BGP group RTC-VTX Falfurrias";

            unit 0 {

                family inet {

                    filter {

                        input-list Protect_RE;

                    }

                    address x.x.x.x/30;

                }

            }

        }

        xe-0/3/0 {

            description "LAG AE1 to CORE-SW AE0";

            gigether-options {

                802.3ad ae1;

            }

        }

       

        inactive: xe-2/0/0 {

            description "10Gig link to Procera Internal";

            enable;

            vlan-tagging;

            unit 250 {

                vlan-id 250;

                family inet {

                    address 10.250.250.1/30;

                }

            }

            unit 251 {

                vlan-id 251;

                family inet {

                    address 10.250.251.1/30;

                }

            }

        }

        inactive: xe-2/0/1 {

            description "10Gig link to Procera External";

            enable;

            vlan-tagging;

            unit 250 {

                vlan-id 250;

                family inet {

                    address 10.250.250.2/30;

                }

            }

            unit 251 {

                vlan-id 251;

                family inet {

                    address 10.250.251.2/30;

                }

            }

        }

        xe-2/0/2 {

            description "10Gig LAG AE2 to RVRA E7-1 LAG1";

            gigether-options {

                802.3ad ae2;

            }

        }

        xe-2/0/3 {

            description "10Gig LAG AE2 to RVRA E7-1 LAG1";

            gigether-options {

                802.3ad ae2;

            }

     


    #mx104


  • 2.  Re: Lag interface question on MX104

    Posted 10-01-2020 16:13

    hi, yes, you can use any 10gb ports for lag without any limitation