Security

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Information required when you take handover of a Juniper firewall

    Posted 08-16-2021 09:06
    I am going to take ownership of an SGG350M Firewall+VPN device and I want to know what is the list of details I need to get from previous owner and which I cannot recover or get from the firewall configuration available through UI or command line.

    ------------------------------
    MAJDI BEN SAAD
    ------------------------------


  • 2.  RE: Information required when you take handover of a Juniper firewall

    Posted 08-17-2021 05:30
    Hello MAJDI,

    First off, the password of the default username "netscreen" to get all the details you want from your OLD SSG350M and do a reset.

    leangf

    ------------------------------
    Leangf Leangf
    ------------------------------



  • 3.  RE: Information required when you take handover of a Juniper firewall

     
    Posted 08-17-2021 05:50
    I would also ask for the following
    • Downloaded copy of the configuration file
    • Network diagrams and documentation
    • list of access accounts on the device and who was given them
    • Is remote vpn access setup 
      • What is the authentication
      • Who has access
    • List of any site to site vpn
      • pre-shared keys
      • contact of other site connected
      • policies in place to access what resources and why
      • Network subnets connected


    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------