Security Management

  • 1.  Static route on Junos Space

    Posted 07-24-2018 09:55

    Hi 

    I would like to configure static route on ELS switch. Can I do it on Network director module?

    I've checked on user guide. It seems like I can configure IP Service for Controller only 



  • 2.  RE: Static route on Junos Space
    Best Answer

     
    Posted 07-25-2018 03:57

    Hi Halo,

     

    You can configure a static route for EX using a "Quick Template".  There are several options to add to the static route as part of the template like metric, tag etc.  Please see attached screenshots to start with.

     

    Quick_Template.JPGStatic-Route.JPG

    Hope this helps.

     

    -r.

    --------------------------------------------------

    If this solves your problem, please mark this post as "Accepted Solution."
    Kudos are always appreciated Smiley Happy.

     



  • 3.  RE: Static route on Junos Space

    Posted 07-26-2018 00:53

    I see, I can configure a static route on JUNOS space

    Thank you!

     



  • 4.  RE: Static route on Junos Space

    Posted 07-25-2018 06:11

    You can also create a quick CLI configlet to add a static route.  CLI configlets are a good choice for this sort of task:

    if the values you're adding/changing vary by device, or if the configured values are "conditional" based on some aspect of the configured device.

     

    /doug