Security Management

  • 1.  Major PEM 0 Not Powered (MX204)

    Posted 11-03-2020 15:04

    Hello,
    I'm new to the Juniper world and I'd like to ask you for help right away.
    I am working with an MX204 Router and I continue to have an alarm relating to one of the two PEMs.

    I checked, and it's connected correctly.
    Do you know what it can come from? thanks a lot and best regards

     

    admin@juniper204-main> show chassis alarms
    1 alarms currently active
    Alarm time               Class  Description
    2020-10-02 12:26:51 UTC  Major  PEM 0 Not Powered
    
    
    Power PEM 0                          Check
          PEM 1                          OK         38 degrees C / 100 degrees F
    

     

    PEM 0            REV 04   740-070749   1F189421375       AC AFO 650W PSU
    PEM 1            REV 04   740-070749   1F189421618       AC AFO 650W PSU
    


  • 2.  Re: Major PEM 0 Not Powered (MX204)

    Posted 11-03-2020 18:36

    If this PEM is correctly powered then you should open case to JTAC and Juniper will replace this PEM with new one