Management

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Management through vme.0 on QFX5120-32C VC pair

  • 1.  Management through vme.0 on QFX5120-32C VC pair

    Posted 20 days ago
    Hello,

    Could somebody clarify the following situation, is it bug or not?

    I have OOB management through VME interface for VC constructed on QFX5120-32C?
    Both em0 ports of the VC connected to the additional management switch and they status is UP. My VC is accessible.
    Now I decide administratively shutdown port on additional management switch to the QFX5120-32C direction with role "Master".  The role is important.
    After that, I expect, that my VC should be accessible via VME interface through em0 interface of the QFX5120-32C with role "Backup", but is not true.
    If I will change role via CLI between QFX5120-32C, VC begin again accessible. 
    >request chassis routing-engine master switch no-confirm

    Junos: 20.4R3.8 limited

    BEFORE shutdown:
    > show interfaces terse | match em0
    em0 up up
    em0.0 up up eth-switch

    > show interfaces terse | match vme
    vme up up
    vme.0 up up inet 10.128.2.2/24

    > ping 10.128.2.1 source 10.128.2.2 count 1
    PING 10.128.2.1 (10.128.2.1): 56 data bytes
    64 bytes from 10.128.2.1: icmp_seq=0 ttl=64 time=41.471 ms


    AFTER shutdown port to master role QFX5120-32C:
    > show interfaces terse | match em0
    em0 up down
    em0.0 up down eth-switch

    > show interfaces terse | match vme
    vme up up
    vme.0 up up inet 10.128.2.2/24

    > ping 10.128.2.1 source 10.128.2.2 count 1
    PING 10.128.2.1 (10.128.2.1): 56 data bytes

    --- 10.128.2.1 ping statistics ---
    1 packets transmitted, 0 packets received, 100% packet loss


    AFTER switchover role Master/Backup on QFX5120-32C
    > show interfaces terse | match em0
    em0 up up
    em0.0 up up eth-switch

    > show interfaces terse | match vme
    vme up up
    vme.0 up up inet 10.128.2.2/24

    > ping 10.128.2.1 source 10.128.2.2 count 1
    PING 10.128.2.1 (10.128.2.1): 56 data bytes
    64 bytes from 10.128.2.1: icmp_seq=0 ttl=64 time=4.811 ms



    ------------------------------
    ALEXANDR GURBO
    ------------------------------