Management

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



QFX5120 out of band managment interfaces em0 / em1

  • 1.  QFX5120 out of band managment interfaces em0 / em1

     
    Posted 06-15-2021 05:04
    The QFX5120 appears to have two management interfaces - em0 & em1. I seem to be struggling to find much documentation on em1 and how it can be used. Can anyone tell me how em1 can be used?
    Is it possible to use a single IP address switched through both ports similar to a vme interface on a VC/VCF?
    Are you supposed to configure separate IP addresses on them and use 'qualified-next-hop'?

    Any help with this is much appreciated.

    ------------------------------
    Regalis
    JNCIE-ENT #552
    ------------------------------