Junos OS

EX: How to generate a trap in case there are framing errors / fcs errors on an interface?

  • 1.  EX: How to generate a trap in case there are framing errors / fcs errors on an interface?

    Posted 04-20-2021 09:52
    Hi all,
    I'm looking for a config or script to have an EX switch sending an snmp trap in case there are framing errors / fcs erorrs on an interface.
    Like something shown in
    show interfaces extensive | match "(Framing errors:)" | except "Framing errors: 0"
    example:
    switch> show interfaces ge-0/0/10 extensive | match "(Framing errors:)|Physical interface:" | except "Framing errors: 0" 
    Physical interface: ge-0/0/10, Enabled, Physical link is Up
        Errors: 26, Drops: 0, Framing errors: 26, Runts: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0, FIFO errors: 0,
    {master:1}
    switch> 
    Can someone point me to an easy way to implement this via either event-options, event script or similar?
    Many thanks in advance,
    Stefan