Hi n2t,
We might see these when executing some operational commands like "show interfaces X" or "monitor interface traffic", the logs are harmless. However, these are suppressed or handled better in software on the latest releases or one of the recommended releases (say Junos 17.3R3-S10, etc) - https://kb.juniper.net/InfoCenter/index?page=content&id=KB21476&actp=METADATA
Reference to the PR: https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1264004
If you still see this on the fixed versions, please feel free to report to JTAC. It would be nice if you could confirm resolution on the post to help other readers :).
------------------------------
Hope this helps.
Regards,
-r.
--------------------------------------------------
If this solves your problem, please mark this post as "Accepted Solution."
Kudos are always appreciated :).
------------------------------
Original Message:
Sent: 12-30-2020 23:11
From: Unknown User
Subject: rtslib: ERROR Insufficient buffer
Hi,
I saw log messages but no information about it. Hoping someone can help. Tks
chassisd[1568]: rtslib: ERROR IDL IDR Decode Error -2(Allocation Failure)
chassisd[1568]: rtslib: ERROR Insufficient buffer. Growing the buffer and retrying