Junos OS

Expand all | Collapse all

rtslib: ERROR Insufficient buffer

Jump to Best Answer
  • 1.  rtslib: ERROR Insufficient buffer

    Posted 12-30-2020 23:12

    Hi,

    I saw log messages but no information about it. Hoping someone can help. Tks

    chassisd[1568]: rtslib: ERROR IDL IDR Decode Error -2(Allocation Failure)
    chassisd[1568]: rtslib: ERROR Insufficient buffer. Growing the buffer and retrying



  • 2.  RE: rtslib: ERROR Insufficient buffer
    Best Answer

     
    Posted 12-30-2020 23:56

    Hi n2t,

    We might see these when executing some operational commands like "show interfaces X" or "monitor interface traffic", the logs are harmless.  However, these are suppressed or handled better in software on the latest releases or one of the recommended releases (say Junos 17.3R3-S10, etc) - https://kb.juniper.net/InfoCenter/index?page=content&id=KB21476&actp=METADATA

    Reference to the PR: https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1264004

    If you still see this on the fixed versions, please feel free to report to JTAC.  It would be nice if you could confirm resolution on the post to help other readers :).



    ------------------------------
    Hope this helps.

    Regards,
    -r.

    --------------------------------------------------

    If this solves your problem, please mark this post as "Accepted Solution."
    Kudos are always appreciated :).
    ------------------------------