Junos OS

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

QFX5100 2 member virtual chassis upgrade

  • 1.  QFX5100 2 member virtual chassis upgrade

    Posted 08-13-2021 10:39
    I have this virtual chassis with 2 members in one of our locations. The uplinks to the location are connected to FPC0 and FPC1. So, obviously I cannot do normal VC upgrade on this one. I found Juniper documentation that has a workaround. I want to know has anyone tried this? if yes, did you face any issue? Also suggest alternate method if any.

    Juniper doc:

    Upgrading Two-Member QFX Series Virtual Chassis | Two-Member QFX Series Virtual Chassis Upgrade Procedure | Juniper Networks TechLibrary

    ------------------------------
    Rahul Nangare
    ------------------------------


  • 2.  RE: QFX5100 2 member virtual chassis upgrade

    Posted 08-13-2021 21:00
    Hi,

    that step is normal. Isolated one node then upgrade then isolate other node,

    thanks