Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Changes do not apply

This thread has been viewed 7 times
  • 1.  Changes do not apply

    Posted 05-09-2022 11:33
    Hello,

    after making changes to the configuration and committing it, the changes are not applied to the switch. No error messages are displayed.
    The changes are made from the CLI. The web interface does not work.
    This happens on several ex2200-24t-4g switches.

    Version:
    JUNOS Base OS boot [11.1R3.5].
    JUNOS Base OS Software Suite [11.1R3.5] [11.1R3.5] [11.1R3.5
    JUNOS Kernel Software Suite [11.1R3.5] JUNOS Crypto Software Suite [11.1R3.5] [11.1R3.5
    JUNOS Crypto Software Suite [11.1R3.5] [11.1R3.5
    JUNOS Online Documentation [11.1R3.5] [11.1R3.5
    JUNOS Enterprise Software Suite [11.1R3.5] [11.1R3.5
    JUNOS Packet Forwarding Engine Enterprise Software Suite [11.1R3.5] JUNOS Routing Software Suite [11.1R3.5] [11.1R3.5
    JUNOS Routing Software Suite [11.1R3.5] [11.1R3.5] JUNOS Web Management [11.1R3.5
    JUNOS Web Management [11.1R3.5]

    Filesystem Size Used Avail Capacity Mounted on
    /dev/da0s1a 184M 131M 38M 78% /
    devfs 1.0K 1.0K 0B 100% /dev
    /dev/md0 31M 31M 0B 100% /packages/mnt/jbase
    /dev/md1 19M 19M 0B 100% /packages/mnt/jcrypto-ex-11.1R3.5
    /dev/md2 6.1M 6.1M 0B 100% /packages/mnt/jdocs-ex-11.1R3.5
    /dev/md3 152M 152M 0B 100% /packages/mnt/jkernel-ex-11.1R3.5
    /dev/md4 22M 22M 0B 100% /packages/mnt/jpfe-ex42x-11.1R3.5
    /dev/md5 43M 43M 0B 100% /packages/mnt/jroute-ex-11.1R3.5
    /dev/md6 31M 31M 0B 100% /packages/mnt/jswitch-ex-11.1R3.5
    /dev/md7 20M 20M 0B 100% /packages/mnt/jweb-ex-11.1R3.5
    /dev/md8 126M 664K 115M 1% /tmp
    /dev/da0s3e 123M 12M 101M 11% /var
    /dev/da0s3d 369M 11M 329M 3% /var/tmp
    /dev/da0s4d 62M 160K 57M 0% /config
    /dev/md9 59M 61G -61G 114633% /var/rundb
    procfs 4.0K 4.0K 0B 100% /proc
    /var/jail/etc 123M 12M 101M 11% /packages/mnt/jweb-ex-11.1R3.5/jail/var/etc
    /var/jail/run 123M 12M 101M 11% /packages/mnt/jweb-ex-11.1R3.5/jail/var/run
    /var/jail/tmp 123M 12M 101M 11% /packages/mnt/jweb-ex-11.1R3.5/jail/var/tmp
    /var/tmp 369M 11M 329M 3% /packages/mnt/jweb-ex-11.1R3.5/jail/var/tmp/uploads
    devfs 1.0K 1.0K 0B 100% /packages/mnt/jweb-ex-11.1R3.5/jail/dev

    The switches are in production so we are concerned that they will stop working.
    Is there any way to fix this without rebooting?
    If we reboot can we lose the /var/rundb partition?

    We think it may be firmware error, but while we find the time to upgrade them, is there any way to fix this?

    Thanks in advance

    ------------------------------
    Mantenimiento Alisys
    ------------------------------