Junos OS


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

What to replace an SRX110H2-VA with

  • 1.  What to replace an SRX110H2-VA with

    Posted 06-15-2021 10:43
    Hi - I have an old srx110h2-va to replace.  and i need a backup in case one fails.
    So what would people suggest considering i need to do the following:
    1: NATING
    2: DHCP
    3: VPN Tunnels
    4: Use dynamic DNS names in Global address book ? Is it possible ?
    5:  3 Subnets 
    6: easy implementation of a hard deny list.

    I will only be using about 4 of the ports.
    I would like to have a stack, so if one fails the other takes over (whether manual or automatically <-- i dont mind).
    Cost is important.

    I'm not a network engineer, but have to manage the network where I am working.  I do understand most of the concepts though.

    Can anyone make a recommendation please ?




  • 2.  RE: What to replace an SRX110H2-VA with

    Posted 06-18-2021 06:00
    Do you have an existing operation network with these features already implemented?
    And you are looking to have a backup device in the event of failure.

    Or are you looking to expand the current implementation adding these features?
    And want a redundant system (high availability or hot spare).

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)