Junos OS

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about Junos OS.
  • 1.  NAT configuration for Internet Access on MX 104 Router

    Posted 11-24-2021 05:51
    Dear All,

    In my office I have MX 104 router and subnet private  LAN subnet (10.0.0.0/8) and a Public  a IP  and I want to do basic NAT for Internet access on my private LAN.
    Can Someone help me with configuration also I don't have Service Card for NAT in my router.   
    Private IP range :10.0.0.0/8
    Public IP:192.176.44.128/29 

    ------------------------------
    VIKAS BHARTI
    ------------------------------


  • 2.  RE: NAT configuration for Internet Access on MX 104 Router

    Posted 11-24-2021 16:30
    The general data sheet does show that the mx104 supports nat configuration. But it is not clear what license may be required for this.

    https://www.juniper.net/us/en/products/routers/mx-series/mx-series-universal-routing-platforms-datasheet.html

    you could just try the basic configuration example and see if you get any license warnings once setup.

    https://kb.juniper.net/InfoCenter/index?page=content&id=KB29708

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------