Junos OS


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  NAT configuration for Internet Access on MX 104 Router

    Posted 12 days ago
    Dear All,

    In my office I have MX 104 router and subnet private  LAN subnet ( and a Public  a IP  and I want to do basic NAT for Internet access on my private LAN.
    Can Someone help me with configuration also I don't have Service Card for NAT in my router.   
    Private IP range :
    Public IP: 


  • 2.  RE: NAT configuration for Internet Access on MX 104 Router

    Posted 11 days ago
    The general data sheet does show that the mx104 supports nat configuration. But it is not clear what license may be required for this.


    you could just try the basic configuration example and see if you get any license warnings once setup.


    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)