Junos OS

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Traffic Accounting with Netflow or ipfix

  • 1.  Traffic Accounting with Netflow or ipfix

    Posted 06-09-2021 06:15
    Hello,

    i try to sample my Traffic with our mx240 but i get some error:

    fpc1 sampler_add:Rcvd Inline Sampling Instance Request on the Non supporting pfe, inst: NETFLOW-INSTANCE

    my config:
    set chassis fpc 1 sampling-instance NETFLOW-INSTANCE
    set chassis network-services ip

    set services flow-monitoring version9 template LM-V9 option-refresh-rate seconds 25
    set services flow-monitoring version9 template LM-V9 template-refresh-rate seconds 15
    set services flow-monitoring version9 template LM-V9 ipv4-template


    set forwarding-options sampling instance NETFLOW-INSTANCE input rate 1 run-length 0
    set forwarding-options sampling instance NETFLOW-INSTANCE family inet output flow-server 192.168.1.2 port 2055
    set forwarding-options sampling instance NETFLOW-INSTANCE family inet output flow-server 192.168.1.2 source 192.168.10.1
    set forwarding-options sampling instance NETFLOW-INSTANCE family inet output flow-server 192.168.1.2 version9 template LM-V9
    set forwarding-options sampling instance NETFLOW-INSTANCE family inet output inline-jflow source-address 192.168.10.1

    set interfaces ae0 unit 12 family inet sampling input
    set interfaces ae0 unit 12 family inet sampling output


  • 2.  RE: Traffic Accounting with Netflow or ipfix

     
    Posted 08-02-2021 05:34
    Looks like your line cards are not supported for the feature.  What is the output of

    show chassis hardware models

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------