"virtual-chassis vcp-snmp-statistics" is deprecated after JUNOS 15.1:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/vcp-snmp-statistics-edit-virtual-chassis.htmlOn my QFX5100 VC I can see VCP traffic statistics without that knob. So this is not necessary to configure.
------------------------------
------------------------------
------------------------------
If my answer provides the solution, please mark my post as "Accepted Solution".
If you think my answer helps, please spend some Kudos
------------------------------
Original Message:
Sent: 11-17-2020 04:25
From: Anatoliy
Subject: SNMP configuration for QFX5100 HA cluster pair
HA cluster for qfx5100 - it VC ? if so , monitoring this box is similar to single switch.
for monitoring (via snmp) vc-links you should enable "virtual-chassis vcp-snmp-statistics".
And you can walk on jnxExSwitching MIB for interesting info
------------------------------
Anatoliy
Original Message:
Sent: 11-16-2020 04:27
From: Unknown User
Subject: SNMP configuration for QFX5100 HA cluster pair
Hi, experts,
I have set up two QFX5100 for HA cluster, but do not how to configure SNMP for monitoring this cluster pair ( master and slave devices), any document or recommendation ?
I am using zabbix server for monitoring network devices.
With many thanks