Hi all!
I'm interested in to configure one interface of my Juniper SRX 220 using mandatory VPN connection to a service provider like NordVPN, ExpressVPN oder CyberGhost.
For example, NordVPN offers IKEv2 protocol. However, this requires a PPP configuration for authentication. A root certificate of NordVPN also plays a role in here.
DrayTek Vigor IKEv2 setup with NordVPN
Nordvpn |
remove preview |
|
DrayTek Vigor IKEv2 setup with NordVPN |
Important update: This tutorial will likely only work for DrayTek routers that have the following version of the firmware: Older versions may fail to authenticate. This tutorial will show you how to create an IKEv2 EAP VPN tunnel from Vigor Router to a NordVPN server. |
View this on Nordvpn > |
|
|
I'm not that familiar with Junos that I am able to configure IKE combined with PPP on my own.
Is there anyone who can support me a little?
Many thanks in advance.
------------------------------
Thomas
------------------------------