Junos OS

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



juniper PPPoE subscriber over aggregate interface

  • 1.  juniper PPPoE subscriber over aggregate interface

    This message was posted by a user wishing to remain anonymous
    Posted 19 days ago
    This message was posted by a user wishing to remain anonymous

    The following subscriber configuration doesn't work over ae0 interface. No users pppoe connection.

    set interfaces ae0 description Interface
    set interfaces ae0 flexible-vlan-tagging
    set interfaces ae0 mtu 5000
    set interfaces ae0 aggregated-ether-options link-speed 10g
    set interfaces ae0 aggregated-ether-options lacp active
    set interfaces ae0 aggregated-ether-options lacp periodic slow
    set interfaces ae0 unit 700 description FIBERHOME
    set interfaces ae0 unit 700 encapsulation ppp-over-ether
    set interfaces ae0 unit 700 vlan-id 700
    set interfaces ae0 unit 700 pppoe-underlying-options duplicate-protection
    set interfaces ae0 unit 700 pppoe-underlying-options dynamic-profile PPPOE-PROFILE
    
    set interfaces xe-0/1/0 gigether-options 802.3ad ae0
    
    
    
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" no-traps
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" ppp-options chap
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" ppp-options pap
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" ppp-options mtu 1492
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" pppoe-options underlying-interface "$junos-underlying-interface"
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" pppoe-options server
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" keepalives interval 30
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet rpf-check
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet tcp-mss 1452
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet unnumbered-address lo0.0
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet6 rpf-check
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet6 tcp-mss 1432
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet6 address $junos-ipv6-address
    set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet6 unnumbered-address lo0.0
    set dynamic-profiles PPPOE-PROFILE protocols router-advertisement interface "$junos-interface-name" no-managed-configuration
    set dynamic-profiles PPPOE-PROFILE protocols router-advertisement interface "$junos-interface-name" other-stateful-configuration
    set dynamic-profiles PPPOE-PROFILE protocols router-advertisement interface "$junos-interface-name" prefix $junos-ipv6-ndra-prefix​


    works only if I change to a non aggregated interface like that:

    set interfaces xe-0/1/1 description TEST
    set interfaces xe-0/1/1 flexible-vlan-tagging
    set interfaces xe-0/1/1 mtu 5000
    
    set interfaces xe-0/1/1 unit 700 description FIBERHOME
    set interfaces xe-0/1/1 unit 700 encapsulation ppp-over-ether
    set interfaces xe-0/1/1 unit 700 vlan-id 700
    set interfaces xe-0/1/1 unit 700 pppoe-underlying-options duplicate-protection
    set interfaces xe-0/1/1 unit 700 pppoe-underlying-options dynamic-profile PPPOE-PROFILE
    



    Unsupported I guess?