This message was posted by a user wishing to remain anonymous
The following subscriber configuration doesn't work over ae0 interface. No users pppoe connection.
set interfaces ae0 description Interface
set interfaces ae0 flexible-vlan-tagging
set interfaces ae0 mtu 5000
set interfaces ae0 aggregated-ether-options link-speed 10g
set interfaces ae0 aggregated-ether-options lacp active
set interfaces ae0 aggregated-ether-options lacp periodic slow
set interfaces ae0 unit 700 description FIBERHOME
set interfaces ae0 unit 700 encapsulation ppp-over-ether
set interfaces ae0 unit 700 vlan-id 700
set interfaces ae0 unit 700 pppoe-underlying-options duplicate-protection
set interfaces ae0 unit 700 pppoe-underlying-options dynamic-profile PPPOE-PROFILE
set interfaces xe-0/1/0 gigether-options 802.3ad ae0
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" no-traps
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" ppp-options chap
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" ppp-options pap
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" ppp-options mtu 1492
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" pppoe-options underlying-interface "$junos-underlying-interface"
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" pppoe-options server
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" keepalives interval 30
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet rpf-check
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet tcp-mss 1452
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet unnumbered-address lo0.0
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet6 rpf-check
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet6 tcp-mss 1432
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet6 address $junos-ipv6-address
set dynamic-profiles PPPOE-PROFILE interfaces pp0 unit "$junos-interface-unit" family inet6 unnumbered-address lo0.0
set dynamic-profiles PPPOE-PROFILE protocols router-advertisement interface "$junos-interface-name" no-managed-configuration
set dynamic-profiles PPPOE-PROFILE protocols router-advertisement interface "$junos-interface-name" other-stateful-configuration
set dynamic-profiles PPPOE-PROFILE protocols router-advertisement interface "$junos-interface-name" prefix $junos-ipv6-ndra-prefix
works only if I change to a non aggregated interface like that:
set interfaces xe-0/1/1 description TEST
set interfaces xe-0/1/1 flexible-vlan-tagging
set interfaces xe-0/1/1 mtu 5000
set interfaces xe-0/1/1 unit 700 description FIBERHOME
set interfaces xe-0/1/1 unit 700 encapsulation ppp-over-ether
set interfaces xe-0/1/1 unit 700 vlan-id 700
set interfaces xe-0/1/1 unit 700 pppoe-underlying-options duplicate-protection
set interfaces xe-0/1/1 unit 700 pppoe-underlying-options dynamic-profile PPPOE-PROFILE
Unsupported I guess?