Junos OS

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about Junos OS.
  • 1.  MX L2VPN Martini Draft

    Posted 01-09-2021 06:43
    Hi
    Browsing Feature Explorer I could not find support for L2VPN(Martini, compatible with Cisco Implementation for P2P L2VPN with VC type#4 VLAN support ) with this configuration on MX960.
    1- Is this configuration supported on MX Series?
    2- Is there any limitation on Supported MPCs?

    set protocols l2circuit neighbor 10.241.252.55 interface ae1.695 virtual-circuit-id 695
    set protocols l2circuit neighbor 10.241.252.55 interface ae1.695 no-control-word
    set protocols l2circuit neighbor 10.241.252.55 interface ae1.695 mtu 1500
    set protocols l2circuit neighbor 10.241.252.70 interface ae1.625 virtual-circuit-id 625
    set protocols l2circuit neighbor 10.241.252.70 interface ae1.625 no-control-word
    set protocols l2circuit neighbor 10.241.252.70 interface ae1.625 mtu 1500

    The above configuration was captured from a M320 Router
    Thank you
    Alireza

    ------------------------------
    Ali Soltan
    ------------------------------


  • 2.  RE: MX L2VPN Martini Draft

    Posted 01-10-2021 07:48
    Hi
    Would you please help me about this?
    Thank you

    ------------------------------
    Ali Soltan
    ------------------------------



  • 3.  RE: MX L2VPN Martini Draft

    Posted 01-10-2021 13:07
    Yes, the configuration is support on mx for all mpc types.  I've used it extensively and interop with Nokia as well.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 4.  RE: MX L2VPN Martini Draft

    Posted 01-11-2021 04:32
    Thank you for the update. Just for checking:
    As far as I understood. this feature required certain license on the card
    for example: 
    - On MPC7E we need to use -RB license
    - On MPC10E we need to use S-MX-10C-P1-P or S-MX-10C-A1-P
    Is this correct?
    Thank you

    ------------------------------
    Ali Soltan
    ------------------------------



  • 5.  RE: MX L2VPN Martini Draft

    Posted 01-13-2021 00:14
    Hi
    Is this assumption correct?
    Thank you

    ------------------------------
    Ali Soltan
    ------------------------------



  • 6.  RE: MX L2VPN Martini Draft
    Best Answer

    Posted 01-10-2021 18:18
    Hi Ali,

    Yes, it is completely supported. No problem.

    Yours sincerely.


  • 7.  RE: MX L2VPN Martini Draft

    Posted 01-11-2021 04:34
    Hi Leonardo
    Thank you for the Answer

    ------------------------------
    Ali Soltan
    ------------------------------