I have two customers both utilising the same topology from below:
custA:CE --> PE --> P -->P -->PE --> CE:CustA:SiteB
custB:CE --> PE --> P --> P --> PE --> CE:CustB-SiteB
Customer A uses eBGP for CE to PE (vrf) and that works fine from end to end across an MPLS underlay (Label switch paths work fine).
Customer B uses OSPF for connectivity and I cannot get that working. Here is the CE and PE basic configs:
Cust B - CE:
set interfaces ge-0/0/0 unit 0 family inet address 10.10.10.2/30
set interfaces lo0 unit 0 family inet address 3.3.3.3/32
set routing-options router-id 3.3.3.3
set protocols ospf area 0.0.0.0 interface ge-0/0/0.0
set protocols ospf area 0.0.0.0 interface lo0.0 passive
PE:
set routing-instances london-custA instance-type vrf
set routing-instances london-custA interface ge-0/0/0.0
set routing-instances london-custA route-distinguisher 65533:10
set routing-instances london-custA vrf-target target:65533:10
set routing-instances london-custA protocols ospf area 0.0.0.0 interface ge-0/0/0.0
I think the issue is that the routes currently show in the vrf as IPv4 routes and these need to be distributed into MP-BGP to become the VPN4 routes. Problem is I cannot find out how to that anywhere. Can someone point me in the right direction please.
Thanks
------------------------------
Spuddy
------------------------------