Junos OS


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

how to see juniper full configurations(default or hidden)?

  • 1.  how to see juniper full configurations(default or hidden)?

    Posted 05-17-2021 12:40
    operational mode ">show configuration" or in configuraiton mode "show, show | display set" will provide committed configuration. I want to see juniper's default settings/configurations like cisco "show running-config all". Basically need to see juniper's default configurations like ddos,bgp,ldp. 


  • 2.  RE: how to see juniper full configurations(default or hidden)?

    Posted 05-18-2021 05:55
    Note that using "display set" is not the normal configuration view but the commands to create configuration.  This view removes notes and information that is included in standard view of simple
    show configuration

    The settings I think you are referring to that you want to see are in a hidden not changeable group called junos-defaults described in this documentation.


    To see how groups are applied in a configuration you use
    show configuration | display inheritance

    But I'm not positive if the junos-defaults is included in this.

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)