Hi,
I have an EX4550(EOL) switch and i am planning to upgrade firmware
from Junos version 12.3R6(current) To 15.1R7-S6.3(Juniper suggested).My question is, does the Junos version
15.1R7-S6.3 support configuring "l3-interface" for vlan, because i read somewhere that newer Junos versions support only irb interface configuration but not vlan interface.
If
15.1R7-S6.3 support configuring "l3-interface" for vlans
, can you give me info from which Junos version l3-interface configuration does not work for vlans and only irb works. Or did i understood wrong please let me know.
Example of vlan and irb interface
set vlans <
vlanname> l3-interface
vlan.<xx>set vlans <
vlanname> l3-interface
irb.<xx>Thankyou
------------------------------
KALEEMULLAH MOHAMMED
------------------------------