Thank you. So then I can assign a /32 to DHCP subscribers (ethernet)? Typically on ethernet segments, you have a subnet, a gateway in that subnet, and the dhcp server hands out an IP out of that subnet. The hosts can ARP for the gateway IP and reach outside destinations.
However I would like to issue /32 IPs to DHCP subscribers thus they really wouldn't be a part of any subnet at that point. I would use unnumbered and borrow from the loopback IP. I think this is possible if I just enable proxy-arp on the interfaces facing the subscribers. This should allow them to ARP for my loopback IP which is their gateway.
Original Message:
Sent: 12-17-2020 09:58
From: Anatoliy Kushner
Subject: PPPoE+DHCP Shared Pool
Hi, yes , no problem with this. you can assign pool from radius (Framed-Pool) or allow system to assign address.
------------------------------
Anatoliy
Original Message:
Sent: 12-17-2020 09:34
From: Unknown User
Subject: PPPoE+DHCP Shared Pool
Can I configure a Juniper BNG with both PPPoE and DHCP support on a dynamic-profile and have both systems (pppoe/dhcp) use the same address pools and avoid any dual-assignment conflicts?