Can someone help me out with a configuration challenge?
I've got two SMF fiber drops plugged into my EX2200-C. Only one of the uplink ports is active, but I'd like them both active for load balance but more importantly for redundancy in case of a failure. The second uplink appears to be entirely disabled, even if it's the only port with an active conection.
My configuration today, for the uplink ports, is:
MY PORT 0ge-0/1/0 { unit 0 { family ethernet-switching { port-mode access; } } }
MY PORT 1ge-0/1/1 { unit 0 { family ethernet-switching { port-mode access; } } }
The configuration of the ports on my Internet Service Provider's end are as follows:
ISP PORT 0unit 0 {
family inet {
address X.X.X.2/28 {
vrrp-group 1 {
virtual-address X.X.X.1;
priority 200;
preempt;
accept-data;
}
}
}
}
ISP PORT 1unit 0 {
family inet {
address X.X.X.3/28 {
vrrp-group 1 {
virtual-address X.X.X.1;
priority 100;
preempt;
accept-data;
}
}
}
}
What configuration do you recommend for redundancy and/or load balance? How can I set up my EX-2200C to make nice with the ISP configuration?
------------------------------
CHRIS MIHALICZ
------------------------------