Junos OS

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

MX480 DHCP server not working

  • 1.  MX480 DHCP server not working

    Posted 08-18-2021 05:18

    Hello ,  I tried to startd dhcp local server on mx480, but it dosnt accept any request

    set system services dhcp-local-server pool-match-order option-82
    set system services dhcp-local-server pool-match-order external-authority
    set system services dhcp-local-server group IPoE authentication password IPoE
    set system services dhcp-local-server group IPoE authentication username-include user-prefix NOIP
    set system services dhcp-local-server group IPoE authentication username-include option-82 circuit-id
    set system services dhcp-local-server group IPoE authentication username-include option-82 remote-id
    set system services dhcp-local-server group IPoE dynamic-profile CLIENTS-IPoE
    set system services dhcp-local-server group IPoE interface xe-3/2/3.0
    set system services dhcp-local-server group IPoE interface demux0.0

    set interfaces xe-3/2/3 description test
    set interfaces xe-3/2/3 flexible-vlan-tagging
    set interfaces xe-3/2/3 auto-configure vlan-ranges dynamic-profile VLAN-IPoE accept dhcp-v4
    set interfaces xe-3/2/3 auto-configure vlan-ranges dynamic-profile VLAN-IPoE ranges 847-847
    set interfaces xe-3/2/3 auto-configure remove-when-no-subscribers
    set interfaces xe-3/2/3 encapsulation flexible-ethernet-services

    DHCP server statistics

    Packets dropped:
    Total 0

    Offer Delay:
    DELAYED 0
    INPROGRESS 0
    TOTAL 0

    Messages received:
    BOOTREQUEST 0
    DHCPDECLINE 0
    DHCPDISCOVER 0
    DHCPINFORM 0
    DHCPRELEASE 0
    DHCPREQUEST 0
    DHCPLEASEQUERY 0
    DHCPBULKLEASEQUERY 0

    Messages sent:
    BOOTREPLY 0
    DHCPOFFER 0
    DHCPACK 0
    DHCPNAK 0
    DHCPFORCERENEW 0
    DHCPLEASEUNASSIGNED 0
    DHCPLEASEUNKNOWN 0
    DHCPLEASEACTIVE 0
    DHCPLEASEQUERYDONE 0

    Chassis

    set chassis redundancy routing-engine 0 master
    set chassis redundancy routing-engine 1 backup
    set chassis redundancy graceful-switchover
    set chassis aggregated-devices ethernet device-count 256
    set chassis network-services enhanced-ip

    set system services subscriber-management overrides interfaces family inet ipoe-dynamic-arp-enable
    set system services subscriber-management enable

    Can you help me, on mx204 with the same configuration dhcp local server works fine. All licenses installed.



  • 2.  RE: MX480 DHCP server not working

    Posted 08-30-2021 09:51
    Fixed by change max-db parametr