Junos OS

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



SRX345 Dual ISP Configuration

  • 1.  SRX345 Dual ISP Configuration

    Posted 10-21-2021 12:12
    Hi everybody,

    I am moving a 2 node cluster SRX345 to a new data centre.
    I am going from one a physical cable Internet link to a two physical cable Internet link for ISP redundancy 
    I would like to use the reth1 interface for web traffic on the primary ISP link and route Site To Site VPN traffic across through the secondary ISP link maybe creating a reth3 interface?
    My question is how to route specific traffic and how I can fail over to a second link in the event of an ISP outage. I'm not sure is it is Dead Peer Detection of something like set routing-options static route 0.0.0.0/0 qualified-next-hop [IP-ADDRESS} preference 6 would work.
    Thanks