Junos OS

Expand all | Collapse all

"delete chassis auto-image-upgrade" and commit after enabling DHCP server on ex4300

Jump to Best Answer
  • 1.  "delete chassis auto-image-upgrade" and commit after enabling DHCP server on ex4300

    Posted 05-13-2020 06:31

    hello

     

    enabled DHCP server on ex4300 stacked switches and get this message

    "delete chassis auto-image-upgrade" and commit.

    Auto Image Upgrade: No DHCP Client in bound state, reset all DHCP clients

    Auto Image Upgrade: DHCP Client State Reset:

    Auto Image Upgrade: No DHCP Client in bound state, reset all DHCP clients

    Auto Image Upgrade: DHCP Client State Reset:

    Auto Image Upgrade: DHCP Client Bound interfaces:

    Auto Image Upgrade: DHCP Client Unbound interfaces:

     

    is it Ok to enter command or will it mess up the stack or get unexpected results

     

    thanks



  • 2.  RE: "delete chassis auto-image-upgrade" and commit after enabling DHCP server on ex4300
    Best Answer

     
    Posted 05-13-2020 06:36

    Hi,

     

    it will just delete using zero touch provisioning feature , which will try to get IP from DHCP to configure the node and software upgrade if you disabled it nothing will happen to the node itself.

     

     

    If this solves your problem, please mark this post as "Accepted Solution."



  • 3.  RE: "delete chassis auto-image-upgrade" and commit after enabling DHCP server on ex4300

    Posted 05-13-2020 06:54

    thanks alot



  • 4.  RE: "delete chassis auto-image-upgrade" and commit after enabling DHCP server on ex4300

     
    Posted 05-13-2020 06:36

    Hello,

     

    you can delete this knob without any issues, there will be no service impact during/after deletion.