Junos OS

 View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

Configure Multicast sender & receiver using LSYS with vMX

Jump to Best Answer
This thread has been viewed 1 times
  • 1.  Configure Multicast sender & receiver using LSYS with vMX

    Posted 05-14-2018 13:21


    I'm preparing myself for JNCIP-SP. I would like to setup multicast network using LSYS with vMX. Multicast sender & receiver will be also LSYS. The network diagram look like shown below :


    Assume that R5 & R6 are members of multicast group 

    I configured PIM spare mode in R1,R2 & R3 interfaces. R2 is RP. My concern is  to know  which configuration required so that multicast traffic could flow from R4 to R5 & R6.


  • 2.  RE: Configure Multicast sender & receiver using LSYS with vMX
    Best Answer

    Posted 06-07-2018 15:02

    Hello Besscou

    In a usual scenario, we would expect joins to come from the receiver hosts to the router. But for your lab, you can try configuring static joins on R5 and R6 interfaces