You were right there was the begining of the 17.X junos
I remove everything but always the same error 😞
Checking pending install on fpc0
Pushing bundle to fpc1
fpc1:
Verified jinstall-vjunos-14.1X53-D49.1-domestic.tgz signed by JuniperSwitchingProduction_2015
Adding vjunos...
Saving contents of boot area prior to installation
WARNING: This package will load JUNOS 14.1X53-D49.1 software.
WARNING: It will save JUNOS configuration files, and SSH keys
WARNING: (if configured), but erase all other files and information
WARNING: stored on this machine. It will attempt to preserve dumps
WARNING: and log files, but this can not be guaranteed. This is the
WARNING: pre-installation stage and all the software is loaded when
WARNING: you reboot the system.
POST-INSTALL...
Saving the config files ...
NOTICE: uncommitted changes have been saved in /var/db/config/juniper.conf.pre-install
Pushing installation package to host...
rcp: /var/run/./vjunos-install.sh: No space left on device
download_file /var/tmp/preinstall/vjunos-install.sh failed, ret=1
WARNING: A REBOOT IS REQUIRED TO LOAD THIS SOFTWARE CORRECTLY. Use the
WARNING: 'request system reboot' command when software installation is
WARNING: complete. To abort the installation, do not reboot your system,
WARNING: instead use the 'request system software delete jinstall'
WARNING: command as soon as this operation completes.
ERROR: jinstall-vjunos fails post-install
ERROR: jinstall-vjunos-14.1X53-D49.1-domestic-signed fails post-install
Removing /var/tmp/jinstall-qfx-5-14.1X53-D49.1-domestic-signed.tgz